Being the DJI Phantom 2 technical support here at Heliguy, I come across many common phantom problems that I see, and fix quickly, on a daily basis. Here are four of the most common phantom problems that you will come across as a DJI Phantom 2 owner. Be careful though, some may require a professional to fix. "When I go
Jan 30, 2016. #7. John N Kronyak said: Has nothing to do with the internet. The satellites should generate the maps. Don't have a solution. Nope, he needs to cache the map or have wifi or data to get the maps, the drone uses satellites for GPS location, they do not provide maps.
The Phantom 3 Standard comes with an 8 GB Micro SD card, but also supports Micro SD cards with a capacity of up to 64 GB. We recommend using a UHS-1 or Class 6 Micro SD card to minimize delay when reading or writing high resolution image files. Do not insert or remove the Micro SD card when the Phantom 3 Standard is turned on.
Just got an update (this time without any issue: from 0% to 100% in 10-15 min). After restarting aircraft, RC and DJI Go App (iOS) i'm succefully connect from iPhone to P3S's wi-fi network, but in main window i receive an red message (RC signal lost, with 1 of 5 bars) and nothing more than a live feed from p3s's camera. Before relinking RC to the aircraft (tap RC icon ->Linking RC ->OK, than

Be sure to disconnect the radio control as soon as it is fully charged. There is also reset for the controller you can try. Resetting the Controller Output board. Press C1+C2+Shutter at the same time, whilst still holding these buttons turn off and turn on the RC .After resetting, the indicator of RC should be Red. P3A fw:1.4.

While hovering your Phantom 3, do the following; Go into the ā€˜General Settingā€™s in the top right hand side of the DJI Go App. Click on ā€˜Gimbal Param Settingsā€™ in the bottom left of the DJI App. Click on ā€˜Adjust Gimbal Rollā€™ in the middle of the screen. Toggle the ā€˜+ / -ā€˜ to get the horizon corrected in a straight line.
Not sure though how it got it unless from my phone when I connected it to the remote with the USB cable. Again, CANNOT get "CAMERA" view button to select under Phantom Pro 3. Only place I get the "Camera" option is for an Inspire - which my drone is not. Flight distance : 318 ft. A reply to all.
I am hoping someone can help me. This is my first drone and I cannot get the RC to link with the aircraft. I updated the firmware on the aircraft. I was not able to figure out how to update the firmware on the RC. I don't know if it even needs to be updated. It would not work when I tried. I put the same firmware on the SD card that I used for updating the aircraft (I deleted the text file
Turning the sharpness down to -2 seems to be the sweet spot. -1 Still reveals way too much aliasing in things like roof shingles, fences and power lines. Too Contrasty: The standard setting can crush your shadows. So contrast at -3 and saturation at -2 with the LOG profile helps to maintain more dynamic range.
0rUqml0.
  • k5tix6u1fx.pages.dev/652
  • k5tix6u1fx.pages.dev/467
  • k5tix6u1fx.pages.dev/79
  • k5tix6u1fx.pages.dev/543
  • k5tix6u1fx.pages.dev/848
  • k5tix6u1fx.pages.dev/523
  • k5tix6u1fx.pages.dev/616
  • k5tix6u1fx.pages.dev/831
  • k5tix6u1fx.pages.dev/885
  • k5tix6u1fx.pages.dev/383
  • k5tix6u1fx.pages.dev/755
  • k5tix6u1fx.pages.dev/41
  • k5tix6u1fx.pages.dev/933
  • k5tix6u1fx.pages.dev/243
  • k5tix6u1fx.pages.dev/28

    • dji phantom 3 professional camera not working